Low Pressure Automatic Spray Gun
Features
1. Gun-body is light. The pressure in the air cap is below 0.7 bar, perfect adhesive for coating material ,large pattern width , and 20%-30% coating saving ,suitable for metal powder paints .
2. The spray pathway is made of stainless steel. Nozzles and needles are made of stainless steel, suitable for water-based paints.
Spec
Type of Feed |
Fluid Nozzle Orifice |
Air Cap |
Air Pressure |
Air Consumption |
Fluid Output |
Pattern Width±20 |
Weight |
Remarks |
|
Φmm(in) |
kg/cm²(Mpa) |
l/min |
ml/min |
mm(in) |
g(lbs) |
||||
Pressure |
0.8 (0.03) |
E1 |
2.0-3.0 (0.2-0.29) |
430 |
140 |
200 (7.87) |
465 (1.03) |
Spray distance: 200 (7.87 in) Fluid viscosity: 20±秒/RV-2 Fluid Pressure: 0.8 kg/cm² Fluid/Air/CYL inlet: 1/4PF/NPF |
|
1.0 (0.04) |
150 |
||||||||
G2 |
530 |
270 (10.62) |
|||||||
1.2 (0.05) |
350 |
||||||||
Pressure |
0.8 (0.03) |
G2 |
2.0-3.0 (0.2-0.29) |
530 |
400 |
300 (10.81) |
540 (1.19) |
Spray distance: 200 (7.87 in) Fluid viscosity: 20±秒/RV-2 Fluid pressure: 0.8 kg/cm² Fluid/Air/CYL inlet: 3/8PF/NPF |
|
1.0 (0.04) |
|||||||||
500 |
500 |
||||||||
1.2 (0.05) |